Products
G CODE FOR MACHINING CENTER
G00 - Rapid Positioning | G52 - Local Coordinate Setting |
G01 - Linear Interpolation | G53 - Machine Coordinate Setting |
G02 - Circular Interpolation CW | G54 - Workpiece Coordinate Setting 1 |
G03 - Circular Interpolation CCW | G55 - Workpiece Coordinate Setting 2 |
G04 - Dwell | G56 - Workpiece Coordinate Setting 3 |
G05 - High Speed Machining | G57 - Workpiece Coordinate Setting 4 |
G07 - Imanaginary Axis Designation | G58 - Workpiece Coordinate Setting 5 |
G09 - Exact Stop Check | G59 - Workpiece Coordinate Setting 6 |
G10 - Program Parameter Input | G60 - Single Direction Positioning |
G11 - Program Peramater Input Cancel | G62 - Automatic Corner Override |
G12 - Circle Cutting CW | G63 - Tapping Mode |
G13 - Circle Cutting CCW | G64 - Cutting Mode |
G17 - XY Plane Selection | G65 - User Simple Macro Call |
G18 - XZ Plane Selection | G66 - User Modal Macro Call |
G19 - YZ Plane Selection | G67 - User Modal Macro Call Cancel |
G20 - Input in Inches | G68 - Coordinate System Rotation On |
G21 - Input in Metric | G69 - Coordinate System Rotation Off |
G22 - Stored Stroke Limit ON | G70 - Input in Inch |
G23 - stored Stroke Limit OFF | G71 - Input in Metric |
G27 - Reference Point Return Check | G73 - High Speed Peck Drilling Cycle |
G28 - Automatic Return to Reference Point | G74 - Left Hand Tapping Cycle |
G29 - Automatic Return from Reference Point | G76 - Fine Boring Cycle |
G30 - Return to 2nd, 3rd, 4th Reference Point | G80 - Canned Cycle Cancel |
G31 - Skip Function | G81 - Drilling Cycle |
G33 - Thread Cutting | G82 - Counter Boring Cycle |
G34 - Bolt Hole Circle (Canned Cycle) | G83 - Peck Drilling Cycle |
G35 - Line at Angle (Canned Cycle) | G84 - Right Hand Tapping Cycle |
G36 - Arc (Canned Cycle) | G85 - Boring Cycle |
G40 - Cutter Compensation Cancel | G87 - Back Boring Cycle |
G41 - Cutter Compensation Left | G90 - Absolute Positioning |
G42 - Cutter Compensation Right | G91 - Incremental Positioning |
G43 - Tool Length Compensation + | G92 - Reposition Origin Point |
G44 - Tool Length Compensation - | G94 - Feed Per Minute |
G45 - Tool Offset Increase | G95 - Feed Per Revolution |
G46 - Tool Offset Decrease | G96 - Constant Surface Speed Control On |
G49 - Tool Length Compensation Cancel | G97 - Constant Surface Speed Control Off |
G50 - Scaling Off | G98 - Set Initial Plane |
G51 - Scaling On | G99 - Return to R Plane |